 |  | 
 
Used in many 2006+ SunMaster tanning beds. Super efficient, extremely cool running, state of the art. They are the most advanced ballasts available.
Designed to push 1 to 4 lamps in the F71-F74 100W range. Can be used to power two 160W lamps, but is not within specification to do so, thus not warranted for such. (this is a more powerful way to push two 160W lamps than the WH8)
Please note: This is NOT a direct or simple retrofit for other tanning beds, and it wires up VERY DIFFERENTLY. If you are looking for a replacement ballast for a NON-SunMaster bed, and you are not a technician, don't order this ballast. Like all electronics, it is non-returnable for other than defect. If you are comfortable swapping out a few wires, this is an excellent replacement for ballasts that are no longer available.
Need a diagram to convert an old bed to new technology? Click here.
Applications:
1 or 2 x F71, F72 F73, F74 or F79 T12 HO
1 or 2 x F71, F72 F73, F74 or F79 T12 VHO (special wiring diagram)
3 x F24 / F30 / F36 / F48 / F59 / F60 / F64 / F71-74 / F84 T12HO
4 x F24 / F30 / F36 / F48 / F59 / F60 / F64 / F71-74 T12HO
Specifications
* Dimensions: 18.75"L x 1.25"T x 3"W
* Power: 320 watts max @ either 120V or 230V.
* Amp draw: 2.86A @ 120VAC, 1.52A @230VAC
* Max. Temp: 70°C (158°F) (typically lower)
|
Worried about lamp breakage? We have you covered.
In the event of damage during shipping, we will replace or refund the damaged lamps. Please accept the shipment, note the damage to the carrier, and call us. Fortunately, damage is rare, but we have you covered regardless. Just call us during normal business hours, east coast time, at 1-800-274-1744. You will NOT have to file any paperwork with the carrier or deal with them at all. We handle everything, and can usually fix the issue on your first phone call to us.
We now have a minimum purchase of 14 lamps. If the website isn't allowing you to mix and match properly, just call us at 1-800-274-1744 to place your order. |
|
